Table of Contents
Advertisement
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
●
●
●
●
●
Procedure
Step 1 Configure an IP address for the client (local PC) to enable communication with
the iBMC management network port.
Step 2 Double-click KVM.exe.
Open the Independent Remote Console.
Figure 10-21 Independent Remote Console login page
Step 3 Enter the network address, user name, and password.
Step 4 Select a login mode.
●
●
Issue 17 (2021-03-09)
Windows 7 32-bit or 64-bit
Windows 8 32-bit or 64-bit
Windows 10 32-bit or 64-bit
Windows Server 2008 R2 32-bit or 64-bit
Windows Server 2012 64-bit
NO TE
● The network address can be in either of the following formats:
iBMC management network port IPv4 or IPv6 address : Port number
–
The IPv6 address must be enclosed in brackets. Example: [fc::64]:444 or
192.168.100.1:444.
iBMC domain name address : Port number
–
● Local and LDAP domain users are supported.
● The preferred port number is the HTTPS service port number, and then the RMCP+
service port number.
● The default port number can be omitted.
Shared Mode: allows two users to access and manage the server node at the
same time. Each user can view the operations performed by the other user.
Private Mode: allows only one user to access and manage the server node at
a time.
Copyright © Huawei Technologies Co., Ltd.
10 Common Operations
131
Advertisement
Table of Contents
