Table of Contents
Advertisement
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
Step 9 Install the air duct for the supercapacitor.
Step 10 Install the server node.
For details, see
Step 11 Power on the server node.
For details, see
----End
8.4.7 Removing the Avago SAS3004iMR PCIe RAID Controller
Card
Procedure
Step 1 Power off the server node.
For details, see
Step 2 Remove the server node.
For details, see
Step 3 Place the server node on the ESD workstation.
Step 4 Determine the position of the Avago SAS3004iMR RAID controller card.
Step 5 Remove the M.2 FRU from the Avago SAS3004iMR RAID controller card.
For details, see
RAID Controller
Step 6 Remove the Avago SAS3004iMR RAID controller card.
For details, see
Step 7 Place the removed component in an ESD bag.
Place only one component in an ESD bag.
----End
8.4.8 Installing the Avago SAS3004iMR PCIe RAID Control
Card
Procedure
Step 1 Power off the server node.
For details, see
Issue 17 (2021-03-09)
8.3.4 Installing an XH321
8.3.1 Power-On
8.3.2 Power-Off
8.3.3 Removing an XH321
8.4.9 Removing an M.2 FRU on the Avago SAS3004iMR PCIe
Card.
8.4.19 Removing a PCIe
NO TICE
8.3.2 Power-Off
Copyright © Huawei Technologies Co., Ltd.
V5.
Procedure.
Procedure.
V5.
Card.
Procedure.
8 Parts Replacement
61
Advertisement
Table of Contents
