Removing The Tpm - Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual

FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide

8.4.15 Removing the TPM

● If the private key of the TPM is used to encrypt data, back up the data before
● If the TPM function has been set on the BIOS, record the settings before
● If a broken or disfigured screw is found on a TPM, take appropriate measures
Procedure
Step 1 Power off the server node.
For details, see
Step 2 Remove the server node.
For details, see
Step 3 Place the server node on the ESD workstation.
Step 4 Remove the air duct.
For details, see
Step 5 Determine the position of the TPM.
Issue 17 (2021-03-09)
NO TICE
removing the TPM.
If the data is not backed up, the encrypted data cannot be decrypted after the
TPM is replaced.
removing the TPM. After replacing the TPM, configure the related settings on
the BIOS again.
Huawei Server Purley Platform BIOS Parameter
For details, see the
Reference
.
to protect data.
8.3.2 Power-Off
8.3.3 Removing an XH321
8.4.23 Removing the Air
Copyright © Huawei Technologies Co., Ltd.
Procedure.
V5.
Duct.
8 Parts Replacement
79