Table of Contents
Advertisement
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
Step 2 Use a network cable to connect the Ethernet port on the local PC to the iBMC
management network port.
Step 3 Set an IP address and subnet mask or route information for the local PC to enable
the PC to communicate with the iBMC.
Step 4 Open the browser on the local PC, enter https://
IP address in the address box, and press Enter.
The iBMC login page is displayed.
Figure 10-1 iBMC login page
Step 5 Log in to the iBMC.
●
Issue 17 (2021-03-09)
NO TE
● The IPv6 address must be enclosed in brackets. Examples:
–
IPv4 address: 192.168.100.1.
–
IPv6 address: [fc00::64].
● If the language of the browser you use to log in to the iBMC WebUI is not Chinese,
English, or Japanese, upgrade the iBMC to V260 or later. Otherwise, the login page may
fail to display.
● If the message "There is a problem with this website's security certificate" is displayed,
click Continue to this website (not recommended).
● If a security alert is displayed, you can ignore this message or perform any of the
following to shield this alert:
–
Import a trust certificate and a root certificate to the iBMC.
For details, see "Importing the iBMC Trust Certificate and Root Certificate" in
FusionServer Pro Xxx iBMC User Guide
–
If no trust certificate is available and network security can be ensured, add the
iBMC to the Exception Site List on Java Control Panel or reduce the Java security
level. This operation poses security risks. Exercise caution when performing this
operation.
Log in as a local user.
a.
Select a language.
Copyright © Huawei Technologies Co., Ltd.
10 Common Operations
iBMC management network port
.
107
Advertisement
Table of Contents
