Table of Contents
Advertisement
Pattern limit setting buttons
These buttons are used to set pattern limits.
These can only be assigned to the four buttons at the top.
• PTN (pattern) LIMIT button
• LIMIT SET button
For details about pattern limits, see "Pattern Limit"
(page 86).
TAKE button
(Assignment in the Setup menu is required.)
Executes an auto transition with the set transition rate and
transition type.
This can only be assigned to the four buttons on the left.
External device operation buttons
(Assignment in the Setup menu is required.)
These buttons are used to control playback, stop, and cue-
up operations on connected devices.
These can only be assigned to the four buttons at the top.
• PLAY button
• STOP button
• CUE button
For details about operation of external devices, see
"Control of VTRs, Disk Recorders, and Extended VTRs"
(page 266).
b Transition execution section
This section is used to execute transitions and check the
progress of the transition.
Independent Key Transition Control Block
The independent key transition control block is used to
execute independent key transitions.
Transition
indicator
Fader lever
Lock button
Transition rate
display
TAKE button
Name
Fader lever
Transition indicator
Transition rate display
TAKE button
30
Description
• Move this up or down to carry
out the transition.
• Press the [KF] button, turning it
on, to enable the fader lever to
be used as a keyframe fader.
• Pressing the lock button splits
the fader lever into two for use
as split faders.
For details, see "Split Fader"
(page 90)
Displays the transition progress
using LEDs.
Displays the configured transition
rate (the time from the beginning
of a transition to its completion).
• Executes an auto transition with
the set transition rate and
transition type.
• During the transition, the button
is lit amber.
• You can also assign a function
to the transition type selection
buttons and [KF] button in the
Setup menu.
For details, see "Setting
Transition Control Block Button
Assignments" (page 376)
Advertisement
Table of Contents
