Table of Contents
Advertisement
For details about the items, see "Macro File Syntax"
(page 463).
3
Select the desired item from the macro editing
candidate list, and press [Set].
The selected item appears at the event insertion
position in the macro creation list as an event
component. Additionally, in the leftmost blank
position of the editing button group (to the right of
[Contents]), a button appears, corresponding to the
item in the macro editing candidate list. For example,
if "Event" is selected, an [Event] button appears.
4
In the editing button group, press the button that has
just appeared.
The item corresponding to the button appears in the
macro editing candidate list.
If you press [Event], the symbol indicating the event
contents appears (see page 464)
5
Select the desired item from the macro editing
candidate list, and press [Set].
At the event insertion position of the macro creation
list, the selected item is added as an event component.
Additionally, in the left to right blank positions of the
editing button group, buttons appear, corresponding to
the item in the macro editing candidate list. For
example, if "MEAutoTransition" is selected, buttons
for the parameters and data for the MEAutoTransition
appears.
6
Repeat steps 4 and 5, to edit the event components.
At the event insertion position of the macro creation
list, the item is added as an event component.
To add further events, repeat steps 1 to 6.
7
Press [Store].
8
Enter a register number as required in the numeric
keypad window, and press [Enter].
The current macro is stored in the specified register.
The display returns to the menu displayed immediately
before offline editing.
To delete an event
1
In the macro creation list, select the event you want to
delete.
2
Press [Delete].
.
342
The selected event is deleted.
If a deleted Event statement is followed by a Continue
statement, the Continue statement is converted to an
Event statement.
3
Press [Store].
To create a new macro
1
From the list in any of the following menus, select an
empty register or file, and press [Off Line Edit].
• Macro >Register >Lock menu (5412)
• Macro >Register >Delete menu (5416)
• Macro >Register >Rename menu (5417)
• File >Shotbox, Macro >Macro >File Edit menu
(7142.1)
The Off Line Edit menu (7142.3) appears.
2
Carry out steps 2 to 7 in "To insert an event"
(page 341) to create an the event.
To close the Off Line Edit menu without saving
the editing results
Press [Exit].
Advertisement
Table of Contents
