Table of Contents
Advertisement
Icon
Message
Error
This operation is canceled, because
the register is locked.
Please change the register status to
be unlocked first.
The file was not able to be read.
It was not possible to make a file.
Failed...
The Source and the target are the
same directory.
Please change the source or the
target directory.
File Open Status
ERROR (01)
ERROR (02)
ERROR (FF): No target device has
been assigned
Format
Success!!
But some partitions cannot be created
because the capacity of the local drive
is not enough.
Failure.
Local drive device is busy.
In order to complete local drive format,
System needs to be restarted and
formatted again.
System will be restarted, then please
execute local drive format again.
Failure.
Make sure of the removable drive.
Frame Memory Copy
Cannot copy while playing back or
recording is in progress.
The number of folder hierarchy has
exceeded the upper limit.
Frame Memory Delete
Cannot delete while playing back or
recording is in progress.
Frame Memory Load
Some of the files could not be loaded
because the memory capacity is
insufficient. XX file(s)
Description
6211.1: Effect >Master Timeline >Store >Edit
6311.1: Snapshot >Master Snapshot >Store >Edit
6411.1: Shotbox >Register >Store/Recall >Edit
An attempt was made to assign to a locked register.
Unlock the register before carrying out the assignment.
7142.1: File >Shotbox, Macro >Macro >File Edit
When [Off Line Edit] was pressed, the selected file could not be read.
Select the file again, and press [Off Line Edit] once more.
7142.3: File >Shotbox, Macro >Macro >File Edit >Off Line Edit
The file could not be written when saving.
Try to save once more.
7162: File >All, External File >Import
Importing a file failed.
Check the format of the original file, and try again.
7172: File >Configure >Unit ID Copy
The same directory and ID were selected for source and target.
Select different directories and IDs.
533X: Device >DDR/VTR
An error was returned from the DDR/VTR, and one of the messages on the
left appears, depending on the error number.
Check the device settings in menu 7355 (Engineering Setup >DCU >Serial
Port Assign) or menu 7325.4 (Engineering Setup >Panel >Device Interface
>Device Assign).
7317: Engineering Setup >System >Maintenance
Formatting of the local drive was completed successfully.
However, because of insufficient local drive capacity, only the possible
number of partitions were created.
7317: Engineering Setup >System >Maintenance
Formatting of the local drive terminated abnormally.
If the local drive is functioning correctly, or in some cases when there is
damage to the local drive, it may not be possible to format the local drive
correctly in a single attempt. In such cases, it is necessary to restart the
system, and then carry out formatting again. Press [OK] to restart the
system.
7317: Engineering Setup >System >Maintenance
Formatting of the removable drive terminated abnormally.
Check that the removable drive is connected correctly.
2122: Frame Memory >File >Copy/Move
The file cannot be copied because the target file to overwrite in the copy
destination is being played back or is recording.
2122: Frame Memory >File >Copy/Move
The folder hierarchy level in the copy destination exceeds the upper limit.
2123: Frame Memory >File >Delete/Rename/Store
The file cannot be deleted because the target file is being played back or is
recording.
2121: Frame Memory >File >Load
The remaining memory capacity has reached zero while loading the folder/
file (where "XX" is the number of files that could not be loaded).
479
Advertisement
Table of Contents
