Independent Key Transition Control Block - Sony XVS-G1 User Manual

Pattern limit setting buttons
The following functions can be assigned to the four
buttons at the top only.
Function Button Description
name name
Limit Set LIMIT SET Sets the pattern limit.
Pattern PTN LIMIT Enables the pattern limit.
Limit
Main/sub switching buttons (multi program 2
mode)
The following functions can be assigned to the four
buttons at the top only.
Function Button Description
name name
Main MAIN Switches operation to the
function on the main side in multi
program 2 mode.
Simultaneously pressing the
[SUB] button activates both the
main and sub operations.
Sub SUB Switches operation to the
function on the sub side in multi
program 2 mode.
b Display
Displays the transition rate.

Independent Key Transition Control Block

The independent key transition control block is used to
execute independent key transitions.
For details, see "Chapter 5 Transitions" (page 93).
a
c Fader lever/transition indicator
Name
Fader lever
Transition
indicator
a Independent key transition execution buttons
(assignable buttons)
You can assign execution buttons for independent key
transitions in the Home > Setup > Panel > Module >
Button Assign menu (19104.21).
For details about assigning buttons, see "Assigning
Control Panel Buttons" (page 397).
Function name
Current Bank:
Key 1 Transition
to Key 8
Transition
b
26
Fader lever
Lock button
Transition indicator
Description
Move this up or down to execute a
transition.
You can press the [KF] button, turning it
on, to use the fader lever as a keyframe
fader.
You can press the lock button to unlock
the fader lever and split it into two for use
as split faders.
Displays the transition progress using
LEDs.
Button Description
name
KEY1 ON Inserts or removes a key
to KEY8 instantaneously.
ON If a key is currently
inserted, the button is lit
amber.
AUTO Inserts or removes a key
TRANS automatically with the set
transition rate and
transition type.
During the transition, the
button is lit amber.