Table of Contents
Advertisement
Control block
Bus name
AUX bus control
AUX1 bus to AUX48 bus
block (AUX bus
operation mode)
Frame memory source 1 bus
Frame memory source 2 bus
Color corrector 1 bus
Color corrector 2 bus
Edit preview bus
DME1 video bus to DME4 video
bus
DME1 key bus to DME4 key bus
M/E-1 UTILITY 1 and 2 buses
M/E-2 UTILITY 1 and 2 buses
M/E-3 UTILITY 1 and 2 buses
M/E-4 UTILITY 1 and 2 buses
M/E-5 UTILITY 1 and 2 buses
P/P UTILITY 1 and 2 buses
M/E-1 key 1 to key 8 fill buses
M/E-2 key 1 to key 8 fill buses
M/E-3 key 1 to key 8 fill buses
M/E-4 key 1 to key 8 fill buses
M/E-5 key 1 to key 8 fill buses
P/P key 1 to key 8 fill buses
M/E-1 key 1 to key 8 source buses
M/E-2 key 1 to key 8 source buses
M/E-3 key 1 to key 8 source buses
M/E-4 key 1 to key 8 source buses
M/E-5 key 1 to key 8 source buses
P/P key 1 to key 8 source buses
M/E-1 DME external video bus
M/E-2 DME external video bus
M/E-3 DME external video bus
M/E-4 DME external video bus
M/E-5 DME external video bus
P/P DME external video bus
DME utility 1 bus
DME utility 2 bus
a) For buttons that not set by default, assignment is required in the Setup
menu.
b) Dual background bus mode can be selected.
c) Can also be assigned using utility bus mode.
Dual background bus mode
You can select the background A bus (3rd row) shifted
signal in the 1st row, and the background B bus (4th row)
shifted signal in the 2nd row.
To set dual background bus mode, press the [DUAL
BKGD BUS] button on the cross-point pad, turning it on.
Cross-point button
Delegation operation
rows
3rd row, 4th row
Press the [AUX 1] to [AUX 48] buttons in the 1st
row/2nd row, turning them on.
3rd row, 4th row
Press the [FMS 1] button and [FMS 2] button in
the 1st row/2nd row, turning them on.
3rd row, 4th row
Press the [CCR 1] button and [CCR 2] button in
the 1st row/2nd row, turning them on.
3rd row, 4th row
Press the [EDIT PVW] buttons in the 1st row/2nd
row, turning them on.
3rd row, 4th row
Press the [DME1 V] and [DME4 V] buttons in the
1st row/2nd row, turning them on.
3rd row, 4th row
Press the [DME1 K] and [DME4 K] buttons in the
1st row/2nd row, turning them on.
3rd row, 4th row
Press the following buttons in the 1st row/2nd
row, turning them on.
[M/E1 UTIL1] button, [M/E1 UTIL2] button
[M/E2 UTIL1] button, [M/E2 UTIL2] button
[M/E3 UTIL1] button, [M/E3 UTIL2] button
[M/E4 UTIL1] button, [M/E4 UTIL2] button
[M/E5 UTIL1] button, [M/E5 UTIL2] button
[P/P UTIL1] button, [P/P UTIL2] button
3rd row, 4th row
Press the following buttons in the 1st row/2nd
row, turning them on.
[M/E1 KEY1 V] to [M/E1 KEY8 V] buttons
[M/E2 KEY1 V] to [M/E2 KEY8 V] buttons
[M/E3 KEY1 V] to [M/E3 KEY8 V] buttons
[M/E4 KEY1 V] to [M/E4 KEY8 V] buttons
[M/E5 KEY1 V] to [M/E5 KEY8 V] buttons
[P/P KEY1 V] to [P/P KEY8 V] buttons
3rd row, 4th row
Press the following buttons in the 1st row/2nd
row, turning them on.
[M/E1 KEY1 K] to [M/E1 KEY8 K] buttons
[M/E2 KEY1 K] to [M/E2 KEY8 K] buttons
[M/E3 KEY1 K] to [M/E3 KEY8 K] buttons
[M/E4 KEY1 K] to [M/E4 KEY8 K] buttons
[M/E5 KEY1 K] to [M/E5 KEY8 K] buttons
[P/P KEY1 K] to [P/P KEY8 K] buttons
3rd row, 4th row
Press the following buttons in the 1st row/2nd
row, turning them on.
[M/E1 DME EXT] button
[M/E2 DME EXT] button
[M/E3 DME EXT] button
[M/E4 DME EXT] button
[M/E5 DME EXT] button
[P/P DME EXT] button
3rd row, 4th row
Press the [DME UTIL1] and [DME UTIL2]
buttons in the 1st row/2nd row, turning them on.
Notes
• The [DUAL BKGD BUS] button requires an assignment
to have been made in the Setup menu (see page 396).
• For the following state of the switcher banks, dual
background bus mode is not available.
- When set to [Dual M/E Assign]
- When the operation mode (M/E Config) is set to DSK
mode
72
a)
Advertisement
Table of Contents
