Sony XVS Series User Manual page 249

No. Parameter Adjustment
2 Size Shape size
3 Deform Amount of shape deformation
4 Soft Softness of shape pattern
5 Angle Angle of shape pattern rotation
a) See page 245.
b) 0 is a round shape, and 100 is the shape of the pattern. Smaller values
make the pattern more rounded.
c) –1.00 is one rotation in the counterclockwise direction. +1.00 is one
rotation in the clockwise direction.
To rotate the shape pattern
1
In the Light 1 menu (4156.3), press [Shape Speed],
turning it on.
When [Shape] is selected, the display of the 5th
parameter changes.
2
Set the following parameters.
No. Parameter Adjustment
5 Speed Rotation speed and direction
a) –100.00 is four rotations per second in the counterclockwise
direction, and +100.00 is four rotations per second in the clockwise
direction. 0.00 stops the rotation.
To change the light to a ring shape
Note
When [Parallel] or [Whole] is selected in the <Spot Mode>
group, the Ring parameter cannot be set if Shape is
disabled.
1
In the Light 1 menu (4156.3), press [Ring].
2
Set the following parameters.
No. Parameter Adjustment
1 Offset Offset from center position (radius)
2 Radius Radius of ring
3 Angle Rotation angle of ring
a) –1.00 is one rotation in the counterclockwise direction. +1.00 is one
rotation in the clockwise direction.
Note
There is no [Radius] parameter setting when [Line] is
selected in the <Spot Mode> group.
To rotate the ring
1
In the Light 1 menu (4156.3), press [Ring Speed],
b)
turning it on.
When [Ring] is selected, the display of the 3rd
c)
parameter changes.
2
Set the following parameter.
No.
3
a) –100.00 is four rotations per second in the counterclockwise
direction, and +100.00 is four rotations per second in the clockwise
direction. 0.00 stops the rotation.
To invert the illuminated area
In the Light 1 menu (4156.3), press [Light Invert], turning
it on.
To add color to the light source
1
In the Light 1 menu (4156.3), press [Light Color
Adjust].
a)
The Light Color Adjust menu (4156.4) appears.
2
In the <Fill Blending Mode> group, select how the
light and image should be blended.
Mix: Lighting as if reflected from a mirror.
Multiply: Light as if reflected from a dull surface
(diffuse reflection).
3
When [Mix] is selected, select the fill color in the <Fill
Source> group.
Flat Color: A single color matte
Hue Rotation: Color matte with a color that gradually
varies
4
Set the following parameters, according to the fill
color selection.
When [Flat Color] is selected
a)
No.
1
2
3
4
When [Hue Rotation] is selected
No.
1
2
249
Parameter Adjustment
Speed Rotation speed and direction
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Brilliancy Brilliance of surface struck by light
a)
Parameter Adjustment
Luminance Luminance
Saturation Saturation
a)