Table of Contents
Advertisement
Setting a mosaic
1
In the M/E-1 >Key1 >Resizer >Enhanced Effect menu
(1115.2), press [Mosaic], turning it on.
2
Set the following parameters.
No.
Parameter Adjustment
1
Size
Size of tiles
2
Aspect
Aspect ratio of tiles
• Negative values expand
• Positive values expand
3
In the <Mosaic/Defocus Mode> group, select the
signal to which to apply the mosaic effect.
Video/Key: Video signal and key signal
Video: Video signal only
Note
Enabling mosaic and selecting [Video/Key] in the
<Mosaic/Defocus Mode> group disables crop and
mask.
To make the mosaic like a relief pattern
1
Press [Relief], turning it on.
2
Set the following parameters.
No.
Parameter Adjustment
3
Gain
Relief depth of mosaic pieces
4
Angle
Light source direction
Setting a defocus
1
In the M/E-1 >Key1 >Resizer >Enhanced Effect menu
(1115.2), press [Defocus], turning it on.
2
In the <Mosaic/Defocus Mode> group, select the
signal to which to apply the defocus effect.
Video/Key: Video signal and key signal
Video: Video signal only
3
Set the parameters.
Set the defocus settings in the same way as for the
DME defocus settings.
For details, see "Defocus Settings" (page 220).
vertically.
horizontally.
Note
Enabling defocus and selecting [Video/Key] in the
<Mosaic/Defocus Mode> group disables crop and
mask.
Setting a mask
1
In the M/E-1 >Key1 >Resizer >Enhanced Effect menu
(1115.2), press [Dual Rszr Effect], turning it on.
2
Press [Mask], turning it on.
3
Press [Mask Menu].
The Mask menu (1115.4) appears.
4
In the <Mask Source> group, select one of the
following.
Box: Use a box pattern as the mask signal.
Circle: Use a circle pattern as the mask signal.
5
Set the following parameters.
No.
Parameter Adjustment
1
H
2
V
3
Size
4
Soft
5
Aspect
6
To invert the mask source, press [Mask Invert],
turning it on.
7
To rotate a pattern, select the type of rotation in the
<Rotation> group, and set the following parameter.
When [Angle] is selected
No.
Parameter
1
Angle
127
Horizontal position
Vertical position
Size of mask
Softness of mask
Aspect ratio
Adjustment
Rotation angle of pattern
• A value of -1.00 corresponds
to a rotation of one turn
counterclockwise.
• A value of +1.00 corresponds
to a rotation of one turn
clockwise.
• A value of 0.00 corresponds to
no rotation.
Advertisement
Table of Contents
