Independent Key Transition Control Block (Simple Type) - Sony CCP-8000 Series User Manual

Independent Key Transition Control Block (Simple
Type)
The left side of this control block controls
key 3, and the right side controls key 4.
The control block for key 3 only is
described as an example, but the operations
on the key 4 control block are the same.
a Independent key transition type
selection buttons
Press one of the following buttons, turning
it on, to select the independent key
transition type.
MIX: Faded in or out.
WIPE: Inserted or deleted with a wipe.
DME: Switches the key with a DME wipe.
CUT: Inserted or deleted instantaneously.
SHIFT: This has the following functions.
• When setting is made in the Setup
menu to allow a different transition
90
Names and Functions of Parts of the Control Panel
3 K-SS button
4 Key source name display/key snapshot buttons
2 Independent key transition execution section
1 Independent key transition type selection buttons
In setup you can assign any key to either
side of this control block. For details, see
"Assigning Keys to the Independent Key
Transition Control Block (Simple Type)" in
Chapter 19 (Volume 3).
type for inserting or deleting a key, it
is possible to display and set the
transition type after the next
transition while this button is held
down.
• While this button is held down, you
can select a key source with the
cross-point buttons for the key bus.
• If you press this button twice in rapid
succession, the key bus selection
button [KEY3] in the cross-point