Table of Contents
Advertisement
When the default Axis Loc setting is used
Axis Loc V
Axis Loc H
Shadow skewed with
Axis Loc set at the lower
left corner of the picture
Shadow skewed with Axis
Loc set at the midpoint on
the left edge of the picture
The flex shadow center axis appears when [Flex Shadow
Axis] is enabled in the <Graphic Type> group of the DME
>Input/Output >Graphic menu (4164).
For details, see "Displaying graphics" (page 206).
Skewing the flex shadow
1
In the Flex Shadow menu (4115), press [Skew].
2
Set the following parameters.
No.
Parameter Adjustment
1
Skew H
Skew horizontally
2
Skew V
Skew vertically
Adding perspective to the flex shadow
1
In the Flex Shadow menu (4115), press [Perspective].
2
Set the following parameters.
No.
Parameter Adjustment
1
Perspective
Add horizontal perspective
H
2
Perspective
Add vertical perspective
V
Shadow size and
perspective adjusted with
default Axis Loc setting
Video
Flex shadow
Axis Loc position
215
Perspective
H=–100
Perspective
V=–100
Inverting the flex shadow
In the <Invert> group of the Flex Shadow menu (4115),
select the direction to invert the shadow.
H: Invert the shadow in the horizontal direction. The
inversion is applied around the [Axis Loc V]
parameter axis set using [Axis Loc].
V: Invert the shadow in the vertical direction. The
inversion is applied around the [Axis Loc H]
parameter axis set using [Axis Loc].
Video
Flex shadow
After
inversion
Before
inversion
When H is enabled
Setting a combine shadow
When there are several images, a flex shadow can be added
to the rear of the image or overlay multiple flex shadows.
Perspective
H=+100
Perspective
V=+100
Before
inversion
After
inversion
When V is enabled
Advertisement
Table of Contents
