Table of Contents
Advertisement
Mat: Creates an effect like light striking paper, cloth,
or another diffusively reflective surface.
2
Set the following parameters.
No.
Parameter Adjustment
1
Intensity
Intensity of diffuse light area
2
Offset
Offset of center of diffuse light area
3
Width
Width of diffuse light area
4
Soft
Softness of diffuse light area
3
When [Normal] or [Mat] is selected in step 1, press
[Bar Diffuse Color] to set the color of the diffuse light
area and set the following parameters.
No.
Parameter Adjustment
1
Luminance Luminance
2
Saturation
Saturation
3
Hue
Hue
With no selection
With a selection
made in the <Bar
made in the <Bar
Light Mode> group
Light Mode> group
Bar Light
Diffuse Light
Diffuse Light
Bar Light
Offset = 0
Trail Settings
Note
Enabling Trail automatically disables Motion Decay,
Keyframe Strobe, or Wind if it is set.
Applying the Trail effect
1
Open the DME >Light/Trail >Trail menu (4152).
Width
2
Press [Trail], turning it on.
3
Set the following parameters.
No.
Parameter Adjustment
1
Decay
2
Interval
3
Live
a) 0.00 represents no afterimage. 100.00 represents no decay in the
afterimage.
Selecting the priority between the current
image and superimposed trail
In the <Priority> group of the DME >Light/Trail >Trail
menu (4152), select the way in which the images are
overlaid.
Over: Input image is on top.
Under: Afterimage trail is on top.
Selecting the afterimage trail signal
In the <Trail Source> group of the DME >Light/Trail
>Trail menu (4152), select the image to insert in the
afterimage trail.
Notes
• Only [Mix Color] or [Ext Video] can be used between
the Background (see page 250), Flex Shadow (see
page 214), Trail, and Wind (see page 243) effects. If
[Mix Color] or [Ext Video] is selected for one of these
effects, the [Mix Color] or [Ext Video] for the other
effects is disabled, and [Flat Color] is selected in its
place.
• When executing a 4-channel combination, [Mix Color]
and [Ext Video] cannot be selected.
Freeze Video: Freeze the input image to use as the
afterimage.
Flat Color: Uses a single color matte as the afterimage.
You can set the following parameters.
No.
Parameter Adjustment
1
Luminance Luminance
2
Saturation
3
Hue
Hue Rotate: Use a color matte whose hue varies slightly
with each frame for the trail of the afterimages. You
can set the following parameters.
No.
Parameter Adjustment
1
Luminance Luminance
2
Saturation
240
Amount of afterimage displayed
Freeze interval
Proportion of time between frozen
images for inserting live video
Saturation
Hue
Saturation
a)
Advertisement
Table of Contents
