Table of Contents
Advertisement
a)
Button name
Description
POST MACRO
Sets macro attachment in post
macro mode.
MACRO ATTACH
Enables macro attachments
ENABLE
assigned to buttons of the M/E
banks and PGM/PST bank.
DISP MODE1 to DISP
Selects display mode 1 to 6 (display
MODE6
mode button).
(XXX)
XXX = display mode name (up to
12 characters)
ROW-n KEY1 to ROW-
Assigns key 1 to 8 buses to the 1st
b)
n KEY8
row or 2nd row.
(KEY1 to KEY8)
n = 1 or 2
b)
ROW-n UTIL1
Assigns utility 1 and 2 buses to the
b)
ROW-n UTIL2
1st row or 2nd row.
(UTL1, UTL2)
n = 1 or 2
b)
ROW-n DME EXT
Assigns DME external video bus to
(DME EXT)
the 1st row or 2nd row.
n = 1 or 2
b)
ROW-n DME UTIL1
Assigns DME utility 1 and 2 buses
b)
ROW-n DME UTIL2
to the 1st row or 2nd row.
(DME UTL1, DME
n = 1 or 2
UTL2)
ROW-n UTIL/SBOX1
Assigns utility/shotbox bank 1 to 10
to ROW-n UTIL/
to the 1st row or 2nd row.
b)
SBOX10
n = 1 or 2
(UTL/SB 1 to UTL/
SB10)
Xpt Hold Status
Displays buses for which cross-
(XPTHLD: AB U12
point hold is set.
K1234 K5678)
XPTHLD BKGD A
Sets cross-point hold for the
XPTHLD BKGD B
background A or B bus.
XPTHLD KEY1 to
Sets cross-point hold key 1 to 8
XPTHLD KEY8
buses.
XPTHLD UTIL1
Sets cross-point hold for the utility 1
XPTHLD UTIL2
and 2 buses.
(XPTHLD UTL1,
XPTHLD UTL2)
XPTHLD DME EXT
Sets cross-point hold for the DME
external video bus.
XPTHLD DME UTIL1
Sets cross-point hold for the DME
XPTHLD DME UTIL2
utility 1 and 2 buses.
(XPTHLD DME UTL1,
XPTHLD DME UTL2)
c)
ROW-n XPTHLD
Sets cross-point hold for the buses
(XPT HOLD)
assigned to the 1st row to 4th row.
n = 1 to 4
c)
ROW-n P/P OUT1
Loads images (OUT1) from the
ROW-n M/E-1 OUT1 to
PGM/PST and M/E-1 to M/E-5
c)
ROW-n M/E-5 OUT1
banks into the 1st row to 4th row
(XXX)
(re-entry buttons).
n = 1 to 4
XXX = Name set to P/P OUT1, M/
E-1 OUT1 to M/E-5 OUT1
a)
Button name
c)
ROW-n P/P OUT6
ROW-n M/E-1 OUT6 to
c)
ROW-n M/E-5 OUT6
(XXX)
b)
UTIL
c)
SHIFT ALL
XPTPAD COPY
d)
AUX MIX
d)
KEY
XPT INHBT SET
XPT INHBT ALLCLR
DUAL BKGD BUS
c)
ROW-n PROT
MACRO TAKE
(TAKE)
Macro Status
(EVENT XX/XX)
MACRO:XXX
(XXX)
a) Button name when setting in the Setup menu. When the display differs
from that on the cross-point pad, the button name shown in parentheses
( ) is displayed.
b) Disabled in key/AUX bus delegation mode.
c) 1st row is disabled in key/AUX bus delegation mode.
d) Enabled in key/AUX bus delegation mode only.
Key/AUX bus delegation mode
Setting key/AUX bus delegation mode in the Setup menu
allows you to use the 1st row buttons as 2nd row
delegation buttons.
For details, see "Setting the Cross-Point Control Block to
Key/AUX Bus Delegation Mode" (page 395).
You can assign the following bus/function delegation
buttons to the 1st row.
1)
KEY1 to KEY8
, UTIL1, UTIL2, DME EXT, DME
UTIL1, DME UTIL2, EDIT PVW, AUX1 to AUX48,
FMS1, FMS2, DME1 V to DME4 V
2)
K
, CCR1, CCR2, UTIL/SBOX1 to UTIL/SBOX10
25
Description
Loads images (OUT6) from the
PGM/PST and M/E-1 to M/E-5
banks into the 1st row to 4th row
(re-entry buttons).
n = 1 to 4
XXX = Name set to P/P OUT6, M/
E-1 OUT6 to M/E-5 OUT6
Assigns the specified bus to the 1st
row to 4th row in utility bus mode.
Switches the cross-point button
rows on all buses to the shifted
state.
Copies the cross-point pad settings.
Executes an AUX mix transition
when the AUX bus is selected.
Selects the signal on the key side in
the 2nd row.
Sets/releases inhibit mode for
cross-point buttons.
Releases inhibit mode for all cross-
point buttons.
Toggles dual background bus
mode.
Inhibits button operation on the 1st
row to 4th row.
n = 1 to 4
Executes a macro take operation.
Displays the macro status.
XX/XX = executed event number /
total number of events
Recalls a macro register (1 to 250).
XXX = macro register name (up to
8 characters)
2)
, DME1 K to DME4
Advertisement
Table of Contents
