Tools Required To Install The Chassis In Rack - Juniper MX204 Hardware Manual

MX204 3D Universal Edge Router Hardware Guide
Related
Documentation
Tools Required to Install the MX204 Chassis in Rack
Related
Documentation
64
Connect cables to the network and external devices.
7.
See "Connecting the MX204 Router to External Devices and Cables" on page
Connect the grounding cable.
8.
See "Grounding the MX204 Router" on page
Connect the AC power cord or DC power cables:
9.
See "Connecting Power to an AC-Powered MX204 Router" on page
See "Connecting Power to a DC-Powered MX204 Router" on page
Power on the router:
10.
See "Powering On an AC-Powered MX204 Router" on page
See "Powering On a DC-Powered MX204 Router" on page
Perform the initial system configuration.
11.
See "Performing the Initial Software Configuration for the MX204 Router" on page
MX204 Router Rack Requirements on page 32
MX204 Router Clearance Requirements for Airflow and Hardware Maintenance on
page 34
MX204 Router Cabinet Requirements and Specifications on page 33
To install the router, you need the following tools and parts:
Phillips (+) screwdriver, number 2
ESD grounding wrist strap
Blank panels to cover any slots not occupied by a component
Mounting brackets, supplied with the router
Sixteen screws for securing the mounting brackets to the chassis, supplied with
therouter
Four mounting screws, supplied with the router
MX204 Site Preparation Checklist on page 35
MX204 Installation Summary on page 63
Installing the MX204 Chassis in a Rack on page 65
72.
73.
77.
76.
80.
Copyright © 2018, Juniper Networks, Inc.
83.
89.