Connecting Power To An Ac-Powered Mx204 Router - Juniper MX204 Hardware Manual

Related
Documentation

Connecting Power to an AC-Powered MX204 Router

Copyright © 2018, Juniper Networks, Inc.
Secure the grounding cable lug with the screws. The holes are sized for 10–32 screws
8.
(see Figure 34 on page
Dress the grounding cable, and verify that it does not touch or block access to router
9.
components, and that it does not drape where people could trip on it.
Figure 34: Connecting Grounding Lug to the MX204 Router
Tools and Parts Required for MX204 Router Grounding and Power Connections on
page 71
Connecting Power to an AC-Powered MX204 Router on page 73
Connecting Power to a DC-Powered MX204 Router on page 77
General Safety Guidelines and Warnings on page 133
General Electrical Safety Guidelines and Warnings on page 155
Prevention of Electrostatic Discharge Damage on page 156
CAUTION: Do not mix AC and DC power supply modules within the same
router. Damage to the router might occur.
You connect AC power to the router by attaching power cords from the AC power sources
to the AC appliance inlets located on the power supply modules.
To connect the AC power cords to the router for each power supply module:
Locate power cords that have a plug appropriate for your geographic location. For
1.
more information, see "AC Power Cord Specifications for MX204 Routers" on page
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
2.
ESD points on the chassis.
Power off the AC input appliance inlet on the source power supply.
3.
Chapter 13: Connecting the Router to Power
73).
46.
73