Juniper MX204 Hardware Manual page 103

MX204 3D Universal Edge Router Hardware Guide
Related
Documentation
Guidelines for Packing Hardware Components for Shipment
122
After locating the serial number of the device or hardware component you want to return,
open a Case with Juniper Networks Technical Assistance Center (JTAC) on the Web or
by telephone.
Before you request an RMA number from JTAC, be prepared to provide the following
information:
Your existing case number, if you have one
Serial number of the component
Your name, organization name, telephone number, fax number, and shipping address
Details of the failure or problem
Type of activity being performed on the device when the problem occurred
Configuration data displayed by one or more
You can contact JTAC 24 hours a day, seven days a week on the Web or by telephone:
Case Manager at CSC:
https://www.juniper.net/cm/
Telephone: +1-888-314-JTAC1-888-314-5822, toll free in U.S., Canada, and Mexico
NOTE: For international or direct-dial options in countries without toll free
numbers, see
https://www.juniper.net/support/requesting-support.html
If you are contacting JTAC by telephone, enter your 12-digit case number followed by the
pound (#) key for an existing case, or press the star (*) key to be routed to the next
available support engineer.
The support representative validates your request and issues an RMA number for return
of the component.
Prevention of Electrostatic Discharge Damage on page 156
To pack and ship individual components:
When you return components, make sure they are adequately protected with packing
materials and packed so that the pieces are prevented from moving around inside the
carton.
Use the original shipping materials if they are available.
Place individual components in antistatic bags.
Write the RMA number on the exterior of the box to ensure proper tracking.
commands
show
Copyright © 2018, Juniper Networks, Inc.
.