Installing Fan Module - Juniper MX204 Hardware Manual

MX204 3D Universal Edge Router Hardware Guide
Installing an MX204 Fan Module
Related
Documentation
96
Figure 44: Removing the Fan Module
To install the fan module (see
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Grasp the fan module by the handle, and place one hand under the fan module for
2.
support.
Place the fan module on the respective slot, and carefully push the fan module into
3.
the chassis until the socket lock snaps into place and holds it.
Using a number-2 Phillips screwdriver, turn the locking screw on the fan module
4.
faceplate until it is tight and secured.
Figure 45: Installing the Fan Module
MX204 Cooling System Description on page 11
Maintaining the MX204 Fan Module on page 115
Prevention of Electrostatic Discharge Damage on page 156
Figure 45 on page 96):
Copyright © 2018, Juniper Networks, Inc.