Advertisement
3 Controller
(3) Controller protection box
■Order type: CR800-MB
■Outline
■Configuration
Table 3-14: Configuration equipment and types
Part name
Controller protection box
Label for serial number
Transparent seal
Cable tie
Screw for fixing of the controller
mounting plate
Instruction Manual
Note1) Mass indicates one set.
■Specifications
Table 3-15: Specifications
Item
Outside dimension
Mass
Construction
Grounding
Paint color
Note1) In the environment where oil, such as machining oil, drops on the controller protection box, provide a shield plate
to protect the controller protection box from the oil droplets.
(1) The robot must be grounded by the customer.
(2) The customer needs to prepare the power cable for protection box fan and the grounding cable.
(Power supply voltage for fan: 200 VAC, Screw size for power supply connection terminal block: M4)
3-60
Storing the controller in this box protects the controller from dust and water.
Use this option, when the controller is installed where environment is oil mist
such as machine shop etc.
Type
CR800-MB
-
-
T50L
M4x8
BFP-A3501
Unit
Specifications
mm
500(W)×725(D)×250(H)
kg
21
-
Note1)
IP54
-
100 or less (class D grounding)
-
Dark gray
Mass
Qty.
Note1)
(Kg)
1
-
1
-
1
-
21
4
-
4
-
1
-
-
Protrusions such as rubber legs are excluded.
-
Self-contained floor type
-
Equivalent to Munsell: 3.5PB3.2/0.8, PANTONE:
432C
Remarks
Remarks
Advertisement
