4.6.7
Other ways to back up settings
You can backup three additional settings of the parameters in memory areas of the inverter
reserved for this purpose. You will find additional information in the List Manual under the
following parameters:
Parameter
p0970
p0971
You can back-up up to 99 additional parameter settings on the memory card. You will find
additional information in the List Manual under the following parameters:
Parameter Description
p0802
p0803
p0804
Inverter with CU240B-2 and CU240E-2 Control Units
Operating Instructions, 07/2010, FW 4.3.2, A5E02299792B AA
Description
Resetting drive parameters
Load the back-up setting (number 10, 11 or 12). You overwrite your actual parameter
setting when loading.
Saving parameters
Backing up the setting (10, 11 or 12).
Data transfer with memory card as source/target
Data transfer with device memory as source/target
Start data transfer
Commissioning
4.6 Back-up the settings and transfer
91