Siemens SINAMICS G120 CU240B-2 Operating Instructions Manual page 63

Terminal Abbreviation
12 AO0+ AO0
13 AO0-
26 AO1+ AO1
27 AO1-
Terminal Abbreviation
14 PTC+
15 PTC-
Inverter with CU240B-2 and CU240E-2 Control Units
Operating Instructions, 07/2010, FW 4.3.2, A5E02299792B AA
Analog outputs
Parameter Factory setting
P0771[0] 0
P0771[1] 0
PTC/KTY84 interface
Parameters Factory setting
P0601 0
4.3 Commissioning with factory settings
Meaning of the factory setting
Analog output is locked;
can be switched from voltage output to current output by
means of P0776
Analog output is locked;
can be switched from voltage output to current output by
means of P0776
Meaning of the factory setting
Evaluation of the motor temperature sensor is locked
Commissioning
63