Siemens SINAMICS G120 CU240B-2 Operating Instructions Manual page 182

Functions
7.7 Protection functions
Parameter
Speed-dependent torque monitoring
P2181
P2182
P2183
P2184
P2185
P2186
P2187
P2188
P2189
P2190
P2192
For more information about these functions, see the List Manual (function diagram 8013 and
the parameter list).
182
Description
Load monitoring, response
Setting the response when evaluating the load monitoring.
0: Load monitoring disabled
>0: Load monitoring enabled
Load monitoring, speed threshold 1
Load monitoring, speed threshold 2
Load monitoring, speed threshold 3
Load monitoring torque threshold 1, upper
Load monitoring torque threshold 1, lower
Load monitoring torque threshold 2, upper
Load monitoring torque threshold 2, lower
Load monitoring torque threshold 3, upper
Load monitoring torque threshold 3, lower
Load monitoring, delay time
Delay time for the message "Leave torque monitoring tolerance band"
Inverter with CU240B-2 and CU240E-2 Control Units
Operating Instructions, 07/2010, FW 4.3.2, A5E02299792B AA