Table of Contents
Advertisement
3.3.3
Connection overview for Power Module
Figure 3-8
In addition to the Power Modules shown above, you can also combine Control Units with a
PM260 Power Module. The PM260 connection corresponds to that of a PM250, however, a
sine-wave filter is integrated in the PM260.
The PM240, PM250 and PM260 Power Modules are available with and without integrated
class A line filters. An external filter has to be installed for all Power Modules to satisfy more
stringent EMC requirements (Class B).
Inverter with CU240B-2 and CU240E-2 Control Units
Operating Instructions, 07/2010, FW 4.3.2, A5E02299792B AA
Connections for PM240 and PM250 Power Modules
Connecting
3.3 Installing the Power Module
43
Hide quick links:
Advertisement
Table of Contents
