Table 11: Poe Specifications For The Srx550 High Memory Services Gateway - Juniper SRX300 Series User Manual

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
network connectivity and electric power, such as voice over IP (VoIP), IP phones, and
wireless access points.
The PoE ports for the SRX550 High Memory Services Gateway reside on the individual
XPIMs. The SRX550 High Memory Services Gateway supports the 16-Port Gigabit Ethernet
XPIM with PoE.
The active Services and Routing Engine manages the overall system PoE power. You can
configure the services gateway to act as power sourcing equipment to supply the power
to the GPIMs connected on the designated PoE ports.
Table 11 on page 11 lists the PoE specifications for the SRX550 High Memory Services
Gateway.
Table 11: PoE Specifications for the SRX550 High Memory Services
Gateway
Power Management Schemes
Supported standards
Supported slots/ports
Total PoE power sourcing capacity
Per-port power limit
Power management modes
SRX300 Series and SRX550 High Memory Services Gateway Gigabit-Backplane
Physical Interface Modules Overview on page 4
Interfaces Port Naming Conventions for the SRX300 Series and SRX550 High Memory
Services Gateways on page 6
SRX300 Series and SRX550 High Memory Services Gateway Interface Modules and
Compatibility on page 7
Chapter 1: SRX Series Services Gateway Interface Modules Support
SRX550 High Memory Services Gateway
IEEE 802.3 af
IEEE 802.3 at
Legacy
PoE is supported on the front panel slots 3,4,6, and
8.
The 645 W AC and 645 W DC power supplies
support the following capacities:
255 W —PoE on a single power supply, or with
redundancy using the two-power-supply option
510 W —PoE using the two-power-supply option
operating as nonredundant
31.2 W
Static: Power allocation for each interface can be
configured.
Class: Power for interfaces is allocated based on
the class of powered device connected.
11