Table of Contents
Advertisement
The configuration takes effective after the device is restarted.
7.12 Configure the Ethernet WAN
Abstract
This page will help you convert LAN to WAN interface.
Steps
1. On the main page of the ZXHN H2640, select Management&Diagnosis > Ethernet
WAN to the Ethernet WAN page, see
Figure 7-20 Ethernet WAN Page
2. Set radiobox On, the device will reboot and LAN will work as WAN interface.
3. Click Apply button to apply the changes.
SJ-20200714160642-002 | 2020-07-27(R1.0)
Note
7 Configure the Management and Diagnosis
Figure
7-20.
7-17
Hide quick links:
Advertisement
Table of Contents
