Zte ZXHN H2640 Maintenance Management Manual page 64

ZXHN H2640 Maintenance Management Guide(TIM)
Parameter
Band Width
SGI
Beacon Interval
Transmitting Power
6. Click Apply button to apply the changes.
WLAN global configuration(5GHz) refers to WLAN global configuration(2.4GHz).
Configuring the Private WLAN SSID Parameters
7. Click Private WLAN SSID Configuration to the configuration page, see
Figure 5-4 Private WLAN SSID Configuration Page
8. Table 5-3
5-4
Description

Mixed(802.11b/g/n/ax)
Radio frequency bandwidth, including Auto,20Mhz and 40Mhz. Default:
Auto.
Click On to enable
Interval for transmitting beacon frames, default: 100 ms.
Beacon frames are used for communicating with other AP devices or
network control devices to announce the WLAN presence.
Level of radio signal transmitting power. A larger value indicates wider
coverage. Options:

100%

80%

60%

40%

20%
Note
lists the private WLAN SSID configuration parameters.
SGI function. Click Off to disable
SJ-20200714160642-002 | 2020-07-27(R1.0)
SGI function.
Figure 5-4.