Configure The Sntp - Zte ZXHN H2640 Maintenance Management Manual

Steps
1. On the main page of the ZXHN H2640, select Internet > DDNS to the DDNS page,
see Figure
Figure 4-27 DDNS Configuration Page
2. Configure the DDNS parameters.
Table 4-17
Table 4-17 Parameter Descriptions for the DDNS
Parameter
Provider
DDNS
Provider URL
Username
Password
Host name
3. Click Apply button to apply the changes.

4.7 Configure the SNTP

SJ-20200714160642-002 | 2020-07-27(R1.0)
4-27.
lists the DDNS parameters.
Description
Supported provider.
Options: DynDNS, DtDNS, No-IP, easyDNS, freedns and TZO.
If the DtDNS is selected, the WAN Connection should be configured.
DDNS Switch. Click On to enable the DDNS function.
The URL of provider.
If the DynDNS HTTP is used, the URL is http://www.dyndns.com.
If the DtDNS HTTP is used, the URL is http://www.dtdns.org.
If the No-IP HTTP is used, the URL is http://www.no-ip.com.
If the easyDNS HTTP is used, the URL is http://www.easydns.com.
If the freedns HTTP is used, the URL is http://freedns.afraid.org.
If the TZO HTTP is used, the URL is http://www.tzo.com.
DDNS server user name.
DDNS server password.
Host name corresponding to the user.
4 Configure the Internet
4-31