Configure The Upnp - Zte ZXHN H2640 Maintenance Management Manual

ZXHN H2640 Maintenance Management Guide(TIM)
Abstract
This procedure describes how to enable the
configuring FTP parameters, including the username and password.
Steps
1. In the left navigation tree, click Local Network > FTP. The FTP Application page is
displayed, see
Figure 5-24 FTP Page
2. Set the parameters. For a description of the parameters, refer to
Table 5-18 FTP Server Parameter Descriptions
Parameter
Server
FTP Username/FTP
Password
3. Click On to enable the FTP server feature ,and click Apply button to apply the
changes.

5.6 Configure the UPnP

Abstract
This page provides the parameters of
Steps
Configuring the UPnP
1. On the main page of the ZXHN H2640, select Local Network > UPnP to the UPnP,
see Figure
5-22
Figure 5-24.
Description
Enable or disable the FTP server feature .
Username and password used to connect to the FTP server.Valid
only if FTP security control is enabled.
5-25.
FTP feature of the ZXHN H2640 by
UPnP configuration features.
SJ-20200714160642-002 | 2020-07-27(R1.0)
Table 5-18.