Configure The Parental Controls - Zte ZXHN H2640 Maintenance Management Manual

Figure 4-25 Port Forwarding Configuration Page
2. Configure the port forwarding parameters.
Table 4-15
Table 4-15 Parameter Descriptions for the Port Forwarding
Parameter
On/Off
Name
Protocol
WAN Host IP Address
LAN Host
WAN Port
LAN Host Port
3. Click Apply button to apply the changes.

4.5 Configure the Parental Controls

Abstract
The section describes how to configure parental controls.
Steps
1. On the main page of the ZXHN H2640, select Internet > Parental Controls to the
Parental Controls page, see
SJ-20200714160642-002 | 2020-07-27(R1.0)
lists the port forwarding settings parameters.
Description
Set radiobox On to enable the port forwarding function.
Virtual host name, which cannot be null.
Protocol name, including TCP, UDP, TCP AND UDP.
The default protocol is TCP.
IP address segment of the WAN-side hosts.
IP address of the LAN-side host.
Port segment of the WAN-side hosts.
Port number of the LAN-side host. Range: 1-65535.
Figure 4-26.
4 Configure the Internet
4-29