Configure The Sip Protocol - Zte ZXHN H2640 Maintenance Management Manual

Table 6-4 Parameter Descriptions of the Special Parameters
Parameter
SIP DSCP Marking
RTP DSCP Marking
UPDATE
9. Click Apply button to apply the changes.

6.4 Configure the SIP Protocol

Abstract
This procedure describes how to configure the SIP Protocol.
Steps
1. On the main page of the ZXHN H2640, select VoIP > SIP Protocol. The SIP
Protocol page is displayed, see
Figure 6-6 SIP Protocol Page
SJ-20200714160642-002 | 2020-07-27(R1.0)
Description
DSCP value of SIP packets, the value range is 0–63.
DSCP value of RTP packets, the value range is 0–63.
The UPDATE message is a mechanism for SIP extension. It updates
the media stream status when a call is not established.
Figure 6-6.
6 Configure the VoIP
6-5