Zte ZXHN H2640 Maintenance Management Manual page 77

4. Click Static Routing to the configuration page, see
Figure 5-19 Static Routing Page
5. Configure the static routing
Table 5-14 Parameter Descriptions for the Static Routing
Parameter
Name
Egress
Network Address
Subnet Mask
Gateway
6. Click Apply button to apply the changes.
Configuring the Policy Routing
7. Click Policy Routing to the configuration page, see
SJ-20200714160642-002 | 2020-07-27(R1.0)
parameters.Table 5-14
Description
The name of static routing entry.
WAN connection for static routing.
IPv4 address of the destination network.
Subnet mask of the destination network.
The next-hop IPv4 address to the destination network.
5 Configure the Local Network
Figure 5-19.
lists the static routing parameters.
Figure 5-20.
5-17