Zte ZXHN H2640 Maintenance Management Manual page 58

ZXHN H2640 Maintenance Management Guide(TIM)
Abstract
The section describes how to configure SNTP. SNTP provides the parameters of SNTP
configuration features.
Steps
1. On the main page of the ZXHN H2640, select Internet > SNTP to the SNTP page,
see Figure
Figure 4-28 SNTP Configuration Page
2. Configure the SNTP parameters.
Table 4-18
Table 4-18 Parameter Descriptions for the SNTP
Parameter
Time Zone
NTP Server1 ~ NTP Server5
Poll Interval
Automatically Adjust Clock For
Daylight
DSCP
4-32
4-28.
lists the SNTP parameters.
Description
Time zone.
IP address of the primary/secondary/third/fourth/fifth NTP
server.
Interval of time synchronization.
Unit: second.
Enable or disable the automatically adjust clock for daylight
function.
To ensure the QoS of communication, DSCP (
Differentiated Services Code Point) encodes the 8 flag
bytes in the IP header of data packets to classify service
SJ-20200714160642-002 | 2020-07-27(R1.0)