Configure The Routing(Ipv6) - Zte ZXHN H2640 Maintenance Management Manual

5.4.2 Configure the Routing(IPv6)

Abstract
The section describes how to configure Routing(IPv6).
The relevant information of Internet status includes Routing Table, Static Routing and
Policy Routing.
Prerequisite
Before configuring routing(IPv6), make sure that the IPv6 WAN connection is created.
Steps
Configuring the Routing Table
1. On the main page of the ZXHN H2640, select Local Network > Routing > IPv6 to
the Routing(IPv6) page.
2. Click Routing Table to the configuration page, see
Figure 5-21 Routing Table Page
3. Click Refresh to refresh the information.
Configuring the Static Routing
4. Click Static Routing to the configuration page, see
SJ-20200714160642-002 | 2020-07-27(R1.0)
5 Configure the Local Network
Figure 5-21.
Figure 5-22.
5-19