Zte ZXHN H2640 Maintenance Management Manual page 49

Figure 4-19 IP Filter Page
9. Table 4-10
Table 4-10 Parameter Descriptions for the IPv4 Filter
Parameter
On/Off
Name
Target
Rule Priority
IP Version
Source IP/Destination IP
Protocol
Ingress
SJ-20200714160642-002 | 2020-07-27(R1.0)
lists the IPv4 filter parameters.
Description
Set radiobox On to enable the function of IP filter.
Name of the IP filter item.
The name must be specified.
Specify to discard or permit the data packages.
Specify the value to modify the service priority.
The IP version includes: Any, IPv4 , IPv6.
Source/Destination IP address.
Select the protocol that needs to filter packets.
By default, it is Any.
Specify the data traffic direction. The Ingress option and
egress option cannot be the same.


If the ingress is LAN, the egress should be a WAN or 3G
connection. The data traffic direction is upstream.
If the ingress is a WAN or 3G connection, the egress
should be the LAN. The data traffic direction is
downstream.
4 Configure the Internet
4-23