ZXHN H2640 Maintenance Management Guide(TIM)
7.10 Check the MAC Table
Abstract
The relevant information of
Steps
1. On the main page of the ZXHN H2640, select Management&Diagnosis > MAC
Table to the MAC Table page, see
Figure 7-18 MAC Table Page
2. Click Refresh button to refresh information.
7.11 Configure the IPv6 Switch
Abstract
This procedure describes how to enable or disable IPv6 support for the ZXHN H2640.
Steps
1. On the main page of the ZXHN H2640, select Management&Diagnosis > IPv6
Switch to the IPv6 Switch page, see
Figure 7-19 IPv6 Switch Page
2. To disable IPv6 support, set IPv6 Function to Off, and click Apply.
7-16
MAC
table is shown as below.
Figure
7-18.
Figure
SJ-20200714160642-002 | 2020-07-27(R1.0)
7-19.