Connecting The Wan (Adsl) Network Interface; Connecting The Telephone Set; Connecting The Power Transformer - Zte ZXV10 H100 User Manual

ZXV10 H100 Home Gateway User Manual (Draft)
•
•
Be sure not to insert the telephone line into any RJ – 45 network interface; otherwise
the H100 will be damaged. Use Ethernet cables with RJ – 45 connectors in compliance
with the CE standard.

2.3 Connecting the WAN (ADSL) Network Interface

2.4 Connecting the Telephone Set

2.5 Connecting the Power Transformer

Use the power transformer to connect the power to the H100 and ensure that the
running indicator on the front panel of the H100 is on.
Please use the power transformer provided by us; otherwise the device might be
damaged.
access to the network through wireless signals and adjust the antenna on the rear
panel of the H100 to the ideal direction to get the effective coverage. You had
better put the H100 in the center of your radio network. Generally, the higher
your antenna is, the better the performance is. Ensure that the H100 is in the
most ideal position in the whole office or home.
Connecting your local network through USB cables
Connecting your local network through bluetooth
Warning:
Warning:
2-2