Zte ZXHN H268A Maintenance Management Manual
  1. Manuals
  2. Brands
  3. Zte Manuals
  4. Gateway
  5. ZXHN H268A
  6. Maintenance management manual

Zte ZXHN H268A Maintenance Management Manual

Home gateway
Hide thumbs Also See for ZXHN H268A:
Table of Contents

Advertisement

Quick Links

See also: User Manual
ZXHN H268A
Home Gateway
Maintenance Management Manual(EXETEL)
Version V1.0
ZTE CORPORATION
No. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://support.zte.com.cn
E-mail: 800@zte.com.cn

Advertisement

Table of Contents
loading

Related Manuals for Zte ZXHN H268A

Summary of Contents for Zte ZXHN H268A

  • Page 1 ZXHN H268A Home Gateway Maintenance Management Manual(EXETEL) Version V1.0 ZTE CORPORATION No. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057 Tel: +86-755-26771900 Fax: +86-755-26770801 URL: http://support.zte.com.cn E-mail: 800@zte.com.cn...
  • Page 2 ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obligations. All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION or of their respective owners.

  • Page 3: Table Of Contents

    4.6.2 Configure the MLD ................. 4-20 Chapter 5 Configure the Local Network ........... 5-1 5.1 Configure the WLAN................... 5-1 5.1.1 Check the WLAN Status ................5-1 5.1.2 Configure the WLAN Basic Settings ............5-2 SJ-20150916162339-007|2017-02-16 (R1.0) ZTE Proprietary and Confidential...
  • Page 4 7.3.3 Manage the User Configuration..............7-5 7.4 Configure the Mirror ................... 7-6 7.5 Configure the TR-069 ..................7-7 7.6 Diagnosis ......................7-10 7.7 Configure the IPv6 Switch................. 7-12 Appendix A Troubleshooting ..............A-1 Figures......................I Table .......................V Glossary .......................VII SJ-20150916162339-007|2017-02-16 (R1.0) ZTE Proprietary and Confidential...

  • Page 5: Chapter 1 Safety Precautions

    Chapter 1 Safety Precautions Before using the device, read the following safety precautions. ZTE bears no liability to open the consequences incurred by violation of the safety instructions. Read the user manuals before using the device. Pay attention to all the cautions in the user manuals and on the product.

  • Page 6: Chapter 2 Product Overview

    2.1 Overview 2.1.1 Features ZXHN H268A is an advanced home gateway. It provides high speed internet, IPTV and voice over IP services through the DSL or GE uplink. It supports the following features: It provides 4 Gigabit Ethernet LAN interfaces.

  • Page 7: Installation Preparation

    Figure 2-1 shows the indicators on the front panel of the ZXHN H268A Figure 2-1 The Front Panel Table 2-1 describes the indicators on the front panel of the ZXHN H268A unit. Table 2-1 Descriptions of Indicators LED Indicator Status Description ZXHN H268A is powered on.

  • Page 8: Figure 2-2 The Side Panel

    ZXHN H268A is not powered on or the USB interface is not connected. Rear panel Figure 2-2 shows the buttons on the side panel of the ZXHN H268A. Figure 2-2 The Side Panel Table 2-2 describes the buttons on the side panel of the ZXHN H268A.

  • Page 9: Hardware Connection

    RJ-45 port. It is used to connect to the network provided by the ISP. WLAN Protected Setup After power on the ZXHN H268A, hold on this button for more than 5 Reset seconds to reset the current settings to the factory default setting, and then the system automatically restarts.

  • Page 10: Figure 2-4 Cable Connection

    Chapter 2 Product Overview Figure 2-4 Cable Connection After the devices are connected to the ZXHN H268A device, press the power button. When the corresponding indicators on the front panel are On, you can enjoy various services provided by the service provider.
  • Page 11 FRP products, metal products, insulated walls, filing cabinet, bricks, and concrete weaken the wireless signals. 4. Make sure that the ZXHN H268A with the WiFi function keeps far away from the following devices: Keep at least two meters far away from electrical devices or components that generate RF noise.

  • Page 12: Chapter 3 Preparatory Work

    ZXHN H268A. Context To log in to open the ZXHN H268A on a computer, you need to set the IP address of the computer to ensure that the IP address of the computer and the maintenance IP address of the ZXHN H268A are in the same network segment.

  • Page 13: Figure 3-1 Ping Page

    ZXHN H268A Maintenance Management Manual(EXETEL) Figure 3-1 Ping Page 7. Open Internet Explorer, and enter http://192.168.20.1 in the address field. Press the Enter key. The login page is displayed, as shown in Figure 3-2. Figure 3-2 Login Page 8. Enter your username and password ((There are two accounts, including username "admin"/password "admin"...

  • Page 14: Figure 3-3 Home Page

    9. Check the device Information. select Management & Diagnosis > Status. The page indicates whether the hardware version and software version are correct, as shown in Figure 3-4. Click Refresh to get the latest information. Figure 3-4 Device Information Page – End of Steps – SJ-20150916162339-007|2017-02-16 (R1.0) ZTE Proprietary and Confidential...

  • Page 15: Chapter 4 Configure The Internet

    The section describes the status of Internet. The relevant information of Internet status is shown as below. Steps 1. On the main page of the ZXHN H268A, select Internet > Status to open the Status page, as shown in Figure 4-1.

  • Page 16: Configure The Dsl Connection

    This procedure describes how to configure a broadband connection (WAN connection) on the network side, so that the subscribers can access the external network. The ZXHN H268A device supports two xDSL transfer modes: ATM and PTM. This procedure takes ATM for example, and configure the four modes of using this transfer mode.
  • Page 17 1. Click Create New Item to open the page of creating new DSL connection. 2. Enter the name of the WAN connection in Connection Name . 3. Set the DSL transfer mode to be ATM. 4. Configure the VPI/VCI. SJ-20150916162339-007|2017-02-16 (R1.0) ZTE Proprietary and Confidential...
  • Page 18 This example describes how to configure DHCP (IPv4) connection. Steps 1. On the home page of the ZXHN H268A device, select Internet > WAN > DSL to open the DSL Connection page. 2. Click Create New Item to open the page of creating new DSL connection.

  • Page 19: Figure 4-2 Dhcp (Ipv4) Connection Page

    If Service Type is selected to be CBR, VBR-nrt or VBR-rt, PCR needs to be configured. Range: 1 – 2000 Sustainable Cell Rate, range :10000 – 19999 If Service Type is selected to be VBR-nrt or VBR-rt, SCR needs to be configured. SJ-20150916162339-007|2017-02-16 (R1.0) ZTE Proprietary and Confidential...
  • Page 20 ZXHN H268A Maintenance Management Manual(EXETEL) Parameter Description Maximum Burst Size, range = 1 – 20001 If Service Type is selected to be VBR-nrt or VBR-rt, MBS needs to be configured. Type The connection type includes Routing and Bridge Connection. In this case, Route is selected.
  • Page 21 WAN connection. By default, On button is not selected. If it is selected, a VLAN tag is carried in the packets sent over the WAN connection, and the VLAN ID must be set. SJ-20150916162339-007|2017-02-16 (R1.0) ZTE Proprietary and Confidential...

  • Page 22: Configure The Ethernet Connection

    Packets that match no classification rules will be processed according to open the default policy showed in The procedure. Steps 1. On the main page of the ZXHN H268A, select Internet > QoS > QoS Global Configuration to open the QoS Global Configuration page, as shown in Figure 4-3.

  • Page 23: Figure 4-4 Qos Classification

    Chapter 4 Configure the Internet Steps 1. On the main page of the ZXHN H268A, select Internet > QoS > Classification to open the Classification page. 2. Click Create New Item to create new QoS classification, as shown in Figure 4-4.

  • Page 24: Configure The Security

    ZXHN H268A Maintenance Management Manual(EXETEL) Parameter Description Specify the data traffic direction. The Ingress option and Egress option cannot be the same. If the Ingress is LAN, the Egress should be a WAN Ingress connection. The data traffic direction is upstream.

  • Page 25: Configure The Filter Criteria

    Chapter 4 Configure the Internet Context The device only supports Firewall based on IPv4. Steps 1. On the main page of the ZXHN H268A, select Internet > Security > Firewall to open the Firewall page, as shown in Figure 4-5.

  • Page 26: Figure 4-6 Ipv4 Filter

    ZXHN H268A Maintenance Management Manual(EXETEL) Figure 4-6 IPv4 Filter 2. Configure the IPv4 filter parameters. Table 4-4 lists the IPv4 filter parameters. Table 4-4 Description of the IPv4 Filter Parameters Parameter Description IPv4 Filter Switch Select On to enable the IPv4 Filter.

  • Page 27: Figure 4-7 Ipv6 Filter

    Mode Specify to discard or permit the data packages. Protocol Protocol name, including TCP, UDP, TCP and UDP, ICMPv6, Any. Select the protocol that needs to filter packets. By default, it is TCP. 4-13 SJ-20150916162339-007|2017-02-16 (R1.0) ZTE Proprietary and Confidential...

  • Page 28: Configure The Alg

    The section describes how to configure ALG, so that ZXHN H268A can translate private IP addresses in layer-4 packets into public IP addresses to enhance security. Steps 1. On the main page of the ZXHN H268A, select Internet > Security > ALG to open the ALG page, as shown in Figure 4-8.

  • Page 29: Configure The Dmz

    IP address and port number from an outside-network address (network side) to an inside-network address (user side) so that an inside-network server can be accessed. Steps 1. On the main page of the ZXHN H268A, select Internet > Security > DMZ to open the DMZ page, as shown in Figure 4-9.

  • Page 30: Configure The Port Forwarding

    URL, instead of an IP address. Steps 1. On the main page of the ZXHN H268A, select Internet > Security > Port Forwarding to open the Port Forwarding page, as shown in Figure 4-10.

  • Page 31: Configure The Ddns

    4.4 Configure the DDNS The section describes how to configure DDNS. DDNS provides the parameters of DDNS configuration function. Steps 1. On the main page of the ZXHN H268A, select Internet > DDNS to open the DDNS page, as shown in Figure 4-11.

  • Page 32: Configure The Sntp

    4.5 Configure the SNTP The section describes how to configure SNTP. SNTP provides the parameters of SNTP configuration features. Steps 1. On the main page of the ZXHN H268A, select Internet > SNTP to open the SNTP page, as shown in Figure 4-12.

  • Page 33: Configure The Mulitcast

    The section describes how to configure IGMP. IGMP provides the parameters of IGMP configuration features. Steps IGMP Mode 1. On the main page of the ZXHN H268A, select Internet > Multicast > IGMP to open the IGMP Mode page, as shown in Figure 4-13.

  • Page 34: Configure The Mld

    The section describes how to configure MLD. MLD provides the parameters of MLD configuration features. Steps MLD Mode 1. On the main page of the ZXHN H268A, select Internet > Multicast > MLD to open the MLD Mode page, as shown in Figure 4-14.

  • Page 35: Figure 4-15 Mld Wan Connection

    MLD WAN Connection page, as shown in Figure 4-15. Figure 4-15 MLD WAN Connection 5. If Manual is selected, please select a WAN Connection. 6. Click Apply button to apply the changes. – End of Steps – 4-21 SJ-20150916162339-007|2017-02-16 (R1.0) ZTE Proprietary and Confidential...

  • Page 36: Chapter 5 Configure The Local Network

    The section describes the status of WLAN. The relevant information of status is shown as below. Steps 1. On the main page of the ZXHN H268A, select Local Network > Status. Click WLAN Status to open WLAN Status page, as shown in Figure 5-1.

  • Page 37: Configure The Wlan Basic Settings

    WLAN basic settings configuration features. Steps WLAN On/Off Configuration 1. On the main page of the ZXHN H268A, select Local Network > WLAN > WLAN Basic to open the WLAN On/Off Configuration page, as shown in Figure 5-3.

  • Page 38: Figure 5-4 Wlan Global Configurations

    5GHz: 20Mhz, 40Mhz, 80Mhz. The default is 80 Mhz. Enable this option to increase the traffic flow. Beacon Interval Time interval for the wireless device to broadcast the SSID information. Keep the default value. Transmitting Power Select the transmitting power as required. SJ-20150916162339-007|2017-02-16 (R1.0) ZTE Proprietary and Confidential...

  • Page 39: Figure 5-5 Wlan Ssid Settings

    ZXHN H268A Maintenance Management Manual(EXETEL) 5. Click Apply button to apply the changes. WLAN SSID Configuration 6. Click WLAN SSID Configuration to WLAN SSID Settings page, as shown in Figure 5-5. Figure 5-5 WLAN SSID Settings 7. Configure the WLAN SSID settings parameters.

  • Page 40: Configure The Wlan Advanced Parameters

    The section describes how to configure WLAN advanced. WLAN Advanced provides the parameters of WLAN advanced configuration features. Steps Access Control-Mode Settings 1. On the main page of the ZXHN H268A, select Local Network > WLAN > WLAN Advanced to open the Access Control-Mode Settings page, as shown in Figure 5-6.

  • Page 41: Configure The Lan

    The section describes the status of LAN. The relevant information of status is shown as below. Steps 1. On the main page of the ZXHN H268A, select Local Network > Status to open the LAN Status page, as shown in Figure 5-8.

  • Page 42: Configure The Lan(Ipv4)

    DHCP Binding . Steps Allocated Address 1. On the main page of the ZXHN H268A, select Local Network > LAN > IPv4 to open the Allocated Address page. 2. Click Refresh to refresh the informations, as shown in Figure 5-10.

  • Page 43: Figure 5-11 Dhcp Server

    ZXHN H268A Maintenance Management Manual(EXETEL) Figure 5-11 DHCP Server 4. Configure the DHCP server parameters. Table 5-5 lists the DHCP server parameters. Table 5-5 DHCP Server Parameters Parameter Description Select On to let the device work as a DHCP server and...

  • Page 44: Configure The Lan (Ipv6)

    Before configuring the prefix delegation, make sure that the prefix delegation is enabled for the specified IPv6 WAN connection. Steps Allocated Address 1. On the main page of the ZXHN H268A, select Local Network > LAN > IPv6 to open the Allocated Address page. SJ-20150916162339-007|2017-02-16 (R1.0) ZTE Proprietary and Confidential...

  • Page 45: Figure 5-13 Allocated Address

    ZXHN H268A Maintenance Management Manual(EXETEL) 2. Click Refresh to refresh the informations, as shown in Figure 5-13. Figure 5-13 Allocated Address LAN Address Management 3. Click LAN Address Management to open the LAN Address Management page, as shown in Figure 5-14.

  • Page 46: Figure 5-16 Dhcpv6 Server Page

    Manual One or more prefixes selected manually from all the static prefixes configured before will be delegated. Disabled No prefix will be delegated. 10. Click Apply button to apply the changes. 5-11 SJ-20150916162339-007|2017-02-16 (R1.0) ZTE Proprietary and Confidential...

  • Page 47: Figure 5-17 Ra Service Page

    ZXHN H268A Maintenance Management Manual(EXETEL) Service 11. Click RA Service to open the RA Service page, as shown in Figure 5-17. Figure 5-17 RA Service Page 12. Configure the service parameters. Table 5-9 lists the RA service parameters. Table 5-9 Parameter Descriptions for the RA Service...

  • Page 48: Configure The Route

    Before configuring static routing, make sure that the IPv4 WAN connection is created. Steps Routing Table 1. On the main page of the ZXHN H268A, select Local Network > Routing > IPv4 to open the Routing Table page, as shown in Figure 5-18.

  • Page 49: Configure The Routing(Ipv6)

    ZXHN H268A Maintenance Management Manual(EXETEL) Figure 5-19 Static Routing 4. Configure the static routing parameters. Table 5-10 lists the static routing parameters. Table 5-10 Static Routing parameters Parameter Description Name The name of static routing entry. WAN Connection WAN connection for static routing. If WAN interfaces and gateway are both configured, please ensure that the gateway can be reached through the WAN interface.

  • Page 50: Figure 5-20 Routing Table

    Chapter 5 Configure the Local Network 1. On the main page of the ZXHN H268A, select Local Network > Routing > IPv6 to open the Routing Table page, as shown in Figure 5-20. Figure 5-20 Routing Table 2. Click Refresh to refresh the informations.

  • Page 51: Configure The Upnp

    5.4 Configure the UPnP The procedure provides the parameters of UPnP configuration features. Steps 1. On the main page of the ZXHN H268A, select Local Network > UPnP to open the UPnP page, as shown in Figure 5-22. Figure 5-22 UPnP 2.

  • Page 52: Figure 5-24 Host Name

    5. Type the host name in the Host Name text box and the IP address in the IP Address text box. 6. Click Apply button to apply the changes. – End of Steps – 5-17 SJ-20150916162339-007|2017-02-16 (R1.0) ZTE Proprietary and Confidential...

  • Page 53: Chapter 6 Configure The Voip

    3. Click the Call Log, and then click the Refresh to refresh the information. – End of Steps – 6.2 Configure the SIP Accounts This procedure describes how to configure basic parameters of the VoIP service, including sip account, authorization username, password. SJ-20150916162339-007|2017-02-16 (R1.0) ZTE Proprietary and Confidential...

  • Page 54: Configure The Advanced Parameters Of Voip

    ZXHN H268A Maintenance Management Manual(EXETEL) Steps 1. Select VoIP > Basic. The SIP Accounts page is displayed, see Figure 6-2. Figure 6-2 SIP Accounts Page 2. Set the parameters. For a description of the parameters, refer to Table 6-1. Table 6-1 Parameter Descriptions for the SIP Accounts...

  • Page 55: Figure 6-3 Advanced Parameters Page

    4. Select VoIP > Advanced > Echo Cancellation. The Echo Cancellation page is displayed, as shown in Figure 6-4. Figure 6-4 Echo Cancellation Page 5. Set the echo cancellation parameters. For a description of the parameters, refer to Table 6-3. SJ-20150916162339-007|2017-02-16 (R1.0) ZTE Proprietary and Confidential...

  • Page 56: Configure The Voip Service

    ZXHN H268A Maintenance Management Manual(EXETEL) Table 6-3 Echo Cancellation Parameter Descriptions Parameter Description Whether to disable the echo cancellation feature. Echo Cancellation Select On to enable the function. Select Off to disable the function. 6. Click Apply button to apply the changes.

  • Page 57: Figure 6-6 Sip Protocol Page

    Registered lifecycle, unit: seconds, default: 3600. Unregister On Reboot Whether to deregister VoIP terminals after the server is restarted. Enable Link Test Whether to enable link tests. Link Test Interval Interval of link tests, default: 20 seconds. SJ-20150916162339-007|2017-02-16 (R1.0) ZTE Proprietary and Confidential...

  • Page 58: Configure The Media

    You can modify priority through this parameter. A lower number indicates a higher priority. 3. Click Apply. – End of Steps – 6.7 Configure the Fax The ZXHN H268A supports the T30 and T38-based fax feature. By default, the T38 protocol is used. SJ-20150916162339-007|2017-02-16 (R1.0) ZTE Proprietary and Confidential...

  • Page 59: Figure 6-8 Fax Page

    Table 6-6 Parameter Descriptions for the Fax Parameter Description Enable T38 Protocol Whether to enable the T38 protocol. If this check box is not selected, the T30 protocol is used. 3. Click Apply. – End of Steps – SJ-20150916162339-007|2017-02-16 (R1.0) ZTE Proprietary and Confidential...

  • Page 60: Chapter 7 Management&Diagnosis

    This procedure introduces how to manage the user accounts and rights. Steps Admin Account Management 1. On the main page of the ZXHN H268A, select Management & Diagnosis > Account Management to open the Admin Account Management page, as shown in Figure 7-1.

  • Page 61: Login Timeout

    Confirm the new password. 3. Click Apply button to apply the changes. User Account Management 4. On the main page of the ZXHN H268A, select Management & Diagnosis > Account Management to open the User Account Management page, as shown in Figure 7-2.

  • Page 62: System Management

    Chapter 7 Management&Diagnosis Steps 1. On the main page of the ZXHN H268A, select Management & Diagnosis > Login Timeout to open the Login Timeout page, as shown in Figure 7-3. Figure 7-3 Login Timeout 2. Specify the time in the Timeout text box.

  • Page 63: Upgrade Firmware

    Before upgrading software, make sure that the upgrade file is ready. Steps 1. On the main page of the ZXHN H268A, select Management & Diagnosis > System Management > Software Upgrade to open the Software Upgrade page, as shown Figure 7-5.

  • Page 64: Manage The User Configuration

    The user can configure the device settings based on his own requirements, and the configuration can be backed up. Steps 1. On the main page of the ZXHN H268A, select Management & Diagnosis > System Management > Config Management to open the Configuration Management page, as shown in Figure 7-6.

  • Page 65: Configure The Mirror

    LAN interface, and it can be used for the network analysis and troubleshooting. Steps 1. On the main page of the ZXHN H268A, select Management & Diagnosis > Mirror Configuration to open the Mirror Configuration page, as shown in Figure 7-7.

  • Page 66: Configure The Tr-069

    TR-069 configuration features. The relevant TR-069 includes Basic Configuration , Certificate Management. Steps Basic Configuration 1. On the main page of the ZXHN H268A, select Management & Diagnosis > TR-069 to open the Basic Configuration page, as shown in Figure 7-8.

  • Page 67: Figure 7-8 Basic Configuration

    The URL of the automatic configuration server that manages the device. Username/Password User name and password for the ZXHN H268A device to log in to open the automatic configuration server. Connection Request URL Connection request URL, which is automatically generated by the system.

  • Page 68: Figure 7-9 Certificate Management

    Click Browse to select a file server CA certificate, and click Import Certificate.. Note: certificate is provided by the to open the terminal user. It is imported from the local. – End of Steps – SJ-20150916162339-007|2017-02-16 (R1.0) ZTE Proprietary and Confidential...

  • Page 69: Diagnosis

    The relevant Diagnosis includes Ping Diagnosis, Trace Route Diagnosis and DSL Line Diagnosis. Steps Ping Diagnosis 1. On the main page of the ZXHN H268A, select Management & Diagnosis > Diagnosis to open the Ping Diagnosis page, as shown in Figure 7-10.

  • Page 70: Figure 7-11 Trace Route Diagnosis

    WAN connection, specify the Maximum Hops, Wait time, and Protocol. 6. After the configuration, click Diagnosis. DSL Line Diagnosis 7. On the main page of the ZXHN H268A, select Management & Diagnosis > Diagnosis to open the DSL Line Diagnosis page, as shown in Figure 7-12.

  • Page 71: Configure The Ipv6 Switch

    – End of Steps – 7.7 Configure the IPv6 Switch The procedure provides IPv6 switch function. Steps 1. On the main page of the ZXHN H268A, select Management & Diagnosis > IPv6 Switch to open the IPv6 Switch page, as shown in Figure 7-13.

  • Page 72: Appendix A Troubleshooting

    If the DSL suddenly fails to be synchronized (link down) during application, usually the Link indicator on the ZXHN H268A will not be On. It is suggested to check the following steps one by one: 1. First check the quality of incoming cables and incoming cable connectors.
  • Page 73 7. If the problem is due to the end office equipment failure, call the operator to confirm 8. Too long connection cable between the splitter and ZXHN H268A may cause poor anti-interference performance and synchronization difficulty. Therefore, the connection cable should not be too long.

  • Page 74: Figures

    Figure 5-4 WLAN Global Configurations ..............5-3 Figure 5-5 WLAN SSID Settings ................5-4 Figure 5-6 WLAN Advanced ..................5-5 Figure 5-7 Access Control-Rule Settings..............5-5 Figure 5-8 LAN Status ....................5-6 Figure 5-9 LAN Client Status ..................5-7 SJ-20150916162339-007|2017-02-16 (R1.0) ZTE Proprietary and Confidential...
  • Page 75 ZXHN H268A Maintenance Management Manual(EXETEL) Figure 5-10 Allocated Address .................. 5-7 Figure 5-11 DHCP Server ..................5-8 Figure 5-12 DHCP Binding..................5-9 Figure 5-13 Allocated Address ................5-10 Figure 5-14 LAN Address Management Server Page..........5-10 Figure 5-15 Static Prefix Page ................5-10 Figure 5-16 DHCPv6 Server Page ................
  • Page 76 Figures Figure 7-13 IPv6 Switch..................7-12 SJ-20150916162339-007|2017-02-16 (R1.0) ZTE Proprietary and Confidential...
  • Page 77 Table 6-5 Media Parameter Descriptions..............6-6 Table 6-6 Parameter Descriptions for the Fax ............6-7 Table 7-1 Admin Account Management parameters ..........7-2 Table 7-2 User Account Management parameters............. 7-2 Table 7-3 Mirror Configuration Parameters..............7-7 SJ-20150916162339-007|2017-02-16 (R1.0) ZTE Proprietary and Confidential...
  • Page 78 ZXHN H268A Maintenance Management Manual(EXETEL) Table 7-4 TR-069 basic parameters ................7-8 SJ-20150916162339-007|2017-02-16 (R1.0) ZTE Proprietary and Confidential...

  • Page 79: Glossary

    - Internet Control Message Protocol IGMP - Internet Group Management Protocol IPoA - IP over ATM IPv4 - Internet Protocol version 4 IPv6 - Internet Protocol Version 6 - Internet Service Provider - Multicast Listener Discovery SJ-20150916162339-007|2017-02-16 (R1.0) ZTE Proprietary and Confidential...
  • Page 80 ZXHN H268A Maintenance Management Manual(EXETEL) - Maximum Transfer Unit - Network Address Translation PPPoE - Point to Point Protocol over Ethernet - Packet Transfer Mode - Quality of Service - Router Advertisement - Short Guard Interval SNTP - Simple Network Time Protocol...

Table of Contents