Configuration Preparation; Configure Tcp/Ip - Zte ZXHN H2640 Maintenance Management Manual

Chapter 3
Configuration
Preparation
Table of Contents

Configure TCP/IP ...................................................................................................................... 3-1

Login ........................................................................................................................................... 3-2
This manual uses the Windows operating system as an example for describing how to
configure the ZXHN H2640. Before configuring the ZXHN H2640, you need to perform
the following operations:
 Ensure that a crossover or straight-through Ethernet cable connects a computer to
the device.
 Ensure that the TCP/IP configuration on the computer is correct.
 Stop any firewall or other security software operating on the computer.
 Disable the proxy setting of Internet Explorer.
3.1 Configure TCP/IP
Abstract
To log in to the ZXHN H2640 on a computer, you need to set the IP address of the
computer to ensure that the IP address of the computer and the maintenance IP
address of the ZXHN H2640 are in the same network segment.
Context
The default maintenance IP address of the ZXHN H2640 is as follows:
 IP address: 192.168.1.1
 Subnet mask: 255.255.255.0
 Default gateway: 192.168.1.1
Steps
1. Use an Ethernet cable to connect a local computer to the LAN interface of the ZXHN
H2640.
SJ-20200714160642-002 | 2020-07-27(R1.0) 3-1