Parameter
3. Click Apply button to apply the changes.
4.8 Configure the Mulitcast
4.8.1 Configure the IGMP
Abstract
The section describes how to configure IGMP. IGMP provides the parameters of IGMP
configuration features.
Steps
1. On the main page of the ZXHN H2640, select Internet > Multicast > IGMP to the
IGMP page, see
Figure 4-29 IGMP Configuration Page
2. Enable the IGMP functions, see
Table 4-19 Parameter Descriptions for the IGMP
Parameter
IGMP Proxy
3. Click Apply button to apply the changes.
4.8.2 Configure the MLD
Abstract
The section describes how to configure MLD. MLD provides the parameters of MLD
configuration features.
SJ-20200714160642-002 | 2020-07-27(R1.0)
Description
types and distinguish service priorities.The value range of
DSCP is 0~63 and each DSCP code value is mapped to a
defined PHB (Per-Hop-Behavior) code.
Figure
4-29.
Table
Description
The system serves as a proxy server to forward IGMP packets
from the MDU/DSLAM to other devices.
4-19.
4 Configure the Internet
4-33