Table of Contents
Advertisement
How to change the copy features (continued)
Introduction
Procedure
How to customize the MAX 200
Scan to print color default
The scan to print color default feature sets up the colors the
scanner recognizes to be printed in red.
Press [Custom Presets] to return to
Previous screen.
System features
Stamp Location and Orientation
Folder Setup
Auto/Manual Mode
Media Cut Mode and Doc. Orientation
Lead/Trail Edge Default for Synchro
Background Suppression Level Default
Image Density
Scan to Print Color Default
1. Enter custom presets. If needed, refer to page 174.
2. Select the copy features tab.
3. Use the arrow buttons to select the scan to print color default
feature.
4. Select open.
The scan to print color default screen is displayed.
Custom Presets
Scan to Print Color Default
One or more colors in the original document may be
copied red. All other colors will be copied in black.
Red
Blue
5. Select the desired colors to be printed in red; red, green,
others, blue, yellow or black.
Multiple colors can be selected.
Others specify colors other than red, blue, green, yellow,
and achromatic colors.
6. Select done to store your changes and exit from this screen.
To cancel the changes and exit from this screen, select cancel.
7. To exit, press the custom presets button.
Storage/Disk
Copy features
Manager
Cancel
Green
Yellow
Open
Done
Others
Black
225
Advertisement
Table of Contents
