Table of Contents
Advertisement
How to change the storage/disk manager features
(continued)
248
Disk manager (format/duplication) (continued)
Duplication (continued)
Custom Presets
Disk Manager
Format Disk
5. Select copy disk.
The copy disk for screen is displayed.
6. Load the source disk (containing the data) into the disk drive.
7. Select start.
When complete, remove the source disk from the floppy drive.
8. Load a (MAX 200 formatted) destination disk into the disk drive.
If needed, refer to page 245.
9. Select start.
10. When the duplication process is complete, select confirm.
The disk manager screen is displayed.
Custom Presets
Disk Manager
Format Disk
11. Select close to exit the disk manager screen.
12. To exit custom presets, press the custom presets button.
Close
Copy Disk
Close
Copy Disk
How to customize the MAX 200
Advertisement
Table of Contents
