Table of Contents
Advertisement
How to change the storage/disk manager features
(continued)
240
Stamp creation/deletion (continued)
Stamp creation (continued)
Setting for R/E value, Copy density, and
Background suppression may be changed
Scanning Setup
Normal
Fixed
Background
Suppression
Red:
Normal
Black: Normal
Image
Density
11. Select the desired selection buttons, on the scanning setup
screen.
Note: The current settings are displayed.
If background suppression is selected, there are three options:
Fixed
Select when the background of the stamp image
is uniform.
Variable
Select when the background of the stamp image
is not uniform.
Off
Select when you want to disable the background
suppression option.
If image density is selected, use the arrow buttons to adjust the
black and red density levels.
If the R/E% for stamp size is needed, select the desired
percentage using the arrow buttons. To further adjust the
percentage use the
12. To save the scanning setup changes, ensure to select done for
each change.
The stamp create/store screen is displayed.
Cancel
Specify R/E% for Stamp size
25.0%
100.0%
100.0%
64.7%
50.0%
25.0%
0.1 buttons
How to customize the MAX 200
Done
100.0%
+0.1
0.1
Advertisement
Table of Contents
