Table of Contents
Advertisement
Touch screen
Message bar
Icons and text
Selection buttons
Getting to know the MAX 200
The touch screens contain messages, copy quantity information,
tabs, buttons, icons and text. There are two types of screens, the
copy feature screens and the custom presets screens.
The copy feature screens are grouped into four feature group tabs;
basic, image quality, additional, and finishing. Whenever a selection
is made from any of the tabs, the selection overrides the custom
presets values until the clear all button is pressed.
The custom presets screens are grouped into three feature group
tabs; system, copy, and storage/disk manager. When you enter
custom presets you can customize the MAX 200 defaults, to meet
your workflow requirements.
Components
Note: The screen below is an example of a copy feature screen.
The text above the selection buttons, displays the current copy
feature selections.
Ready to copy
Load documents face down
Basic
Auto-Mode
R / E; Media:
Cut
Displays the machine conditions, operator instructions, and copy
quantity. In this example the message bar displays the following
information:
Ready to copy
Load documents face down
Tabs
There are four feature group tabs (basic, image quality, additional,
finishing). When a tab is selected, the feature group menu is
displayed. Each feature group has a specific set of selections.
Each feature group screen is divided into columns, each column may
contain an icon with text. Each column provides the operator a quick
overview of the current job selections.
To select touch screen features or options, touch the desired button.
Additional
Image Quality
Black
Red
Line
Fixed
Image
Document
Density
Image Type
Selected 01
Finishing
Black Only
Print Color
Selected 01
19
Advertisement
Table of Contents
