Table of Contents
Advertisement
How to change the system features (continued)
186
Plotter setup (continued)
Set delay time to copy mode
(continued)
Custom Presets
Set Default Time to Copy
Mode
Select delay time before copy mode is active after
completing plotter jobs.
Set Delay
30 seconds
No Delay
5 minutes
6. Select the desired option; set delay or no delay.
If set delay is selected, select the desired time default; 30
seconds, 1, 3, 5, 7, 10 minutes.
7. Select done to store your changes and exit from this screen.
To cancel the changes and exit from this screen, select cancel.
8. To exit, press the custom presets button.
Cancel
Done
1 minute
3 minutes
10 minutes
7 minutes
How to customize the MAX 200
Advertisement
Table of Contents
