Table of Contents
Advertisement
How to change the storage/disk manager features
(continued)
Procedure
How to customize the MAX 200
Stamp creation/deletion (continued)
Stamp creation
Note: If needed, you can setup your start position, for the stamp
location, to be the lead edge or trail edge of your document. If
needed, refer to page 192.
Note: Ensure to have a formatted disk to save the stamp pattern you
have created. If needed, refer to the format procedure on page 245.
Press [Custom Presets] to return to
Previous screen.
System features
Stamp Creation/Deletion
Disk Manager (Format/ Duplication)
E-sorter (Programme) Settings
1. Enter custom presets. If needed, refer to page 174.
2. Select the storage/disk manager tab.
3. Use the arrow buttons to select the stamp creation/ deletion
feature.
4. Select open.
The stamp creation/deletion screen is displayed.
Storage/Disk
Copy features
Manager
Open
237
Advertisement
Table of Contents
