Table of Contents
Advertisement
Stamper (continued)
138
The screen below is the stamper screen. It is displayed when you
select the stamper button, on the finishing feature group tab.
The stamper screen contains five stamper features; stamp pattern,
numbering, stamp location, date stamp, and stamp color.
In order to enable the stamper features select the on button first.
The chart in this section, identifies each feature and provides a
description of each feature.
Select Stamp number from
Stamp pattern screen
Stamper
On
Off
Location
Feature
Function
On
Enable the stamper features.
Off
Disables the stamper features.
Stamp pattern
This feature allows you to select a stamp pattern,
print all stamp patterns, manually load stamp
patterns to memory, or delete all stamp patterns in
memory. Refer to page 139.
Numbering
This feature creates the numbering stamp. You
can have a maximum of 12 characters in the
numbering stamp. Refer to page 141.
Stamp location
This feature sets up the stamp location and
orientation to the preset values in custom presets.
Refer to page 147.
Date stamp
This feature creates the date stamp. There are
two options available current and variable. Refer
to page 153.
Stamp color
This feature prints the stamp pattern in red or
black. Refer to page 158.
Cancel
No. ??
No Print
Stamp
Numbering
Pattern
Auto
No Print
Stamp
Date Stamp
Finishing touch screen features
01
Selected
Done
Red
Stamp Color
Advertisement
Table of Contents
