Table of Contents
Advertisement
How to change the copy features (continued)
How to customize the MAX 200
Color recognition range (continued)
Custom Presets
Color recognition range
Marker Color
50 - 70
Red
195 -230
340 - 5
Red
Yellow
5. Select the desired scanner sensitivity color range, you want to
change; red, green, blue, or yellow.
The color recognition wheel screen is displayed.
Custom Presets
Recognition Range
Magenta
Red
Purple
Violet
Blue
Cyan
Green
6. If needed, there is an example on how to change the range on
page 228. Else continue to the next step.
Note: You do not want the color ranges to overlap. If you
increase the range on one color, be sure to decrease the range
for the adjacent color.
7. Use the left arrow buttons to specify the beginning point of the
recognition range. Use the right arrow buttons to specify the end
point of the recognition range
Select the reset, to return to the default settings.
To cancel the changes and exit from this screen, select cancel.
8. If needed, repeat step 4 – 6, to change other color ranges. Else
continue to the next step.
9. Select done to store your changes and exit from this screen.
10. To exit, press the custom presets button.
Cancel
Scanner Sensitivity
28 – 90
Red
185 – 236
Blue
Cancel
Red (Scanner Sensitivity)
0
Orange
Yellow
Yellow
Reset
Green
Done
236 – 0
Green
0 – 28
Yellow
Done
70
227
Advertisement
Table of Contents
