Table of Contents
Advertisement
Printer control panel (continued)
Indicator
Function
lamp
1 - 5
When a jam has occurred in the tray area, the respective indictor lamp is lit red.
6
When a jam has occurred between RFC drawer 1 and the xerographic area, the indictor
lamp is lit red.
7
When a jam has occurred between RFC drawer 2 and the xerographic area, the
indicator lamp is lit red.
8
When a jam has occurred between the manual feed tray and the xerographic area, the
indicator lamp is lit red.
9
When a jam has occurred before the xerographic area, the indicator lamp is lit red.
10
When a jam has occurred in the fuser area, the indicator lamp is lit red.
11
When a jam has occurred at the printer media exit area for the folder or stacker, the
indicator lamp is lit red.
12
When a jam has occurred at the printer media exit area, for the copy output tray, the
indicator lamp is lit red.
The roll 1 indicator lamp is lit, when the RFC drawer recognizes the specified media
series.
The roll 2 indicator lamp is lit, when the RFC drawer recognizes the specified media
series.
The roll 3 indicator lamp is lit, when the RFC drawer recognizes the specified media
series.
The roll 4 indicator lamp is lit, when the RFC drawer recognizes the specified media
series.
The tray 5 indicator lamp is lit, when tray 5 recognizes the specified media series.
When the black or red toner needs to be replaced, the toner indicator lamp is lit.
Approximately 2000 copies can be made after the indicator lamp is lit.
32
Printer diagram
Getting to know the MAX 200
Advertisement
Table of Contents
