Paper Length Adjustment - Xerox MAX 200 User Manual

R/E; media; cut (continued)
Introduction
Basic touch screen features

Paper length adjustment

Note: The paper length adjustment button is only available if roll
media is selected on the R/E; media; cut screen.
Paper length adjustment feature provides four cut options for
manual mode; standard, synchronized, long copy and variable
length.
Option Function
Standard Cuts roll media to standard and special size lengths.
For detailed information about the standard sizes,
refer to page 56. MAX 200 nonstandard size is
30 x 42 inch.
Synchronized Cuts roll media to the length of the original up to
19.8 feet (6 m). Refer to page 81.
For detailed information on how to set the custom
presets default for the lead and trail edge margins
for synchronized, refer to page 216.
Long copy Cuts roll media for to the length of original, when the
original is greater than 19.8 feet (6m), refer to
page 83.
For detailed information on how to set the custom
presets default for the lead and trail edge margins
for long copy, refer to page 216.
Variable Operator specifies the media cut length. Refer to
length
page 85.
For detailed information on how to set the custom
presets default for each roll, refer to page 218.
79